Lithophane

Click a part to select it, then drag to move it · Drag background: rotate view · Right/middle or Shift+scroll: pan · Scroll: zoom

Building model…

Parts are laid out side by side for printing. The model is built entirely in your browser.

FDM lithophane: use white PLA, print flat on the bed (smooth side down), 0.1 mm layers, set "Print layer height" to match your slicer, 100% infill, 0.4 mm nozzle. View from the textured side (enable "Flip horizontally" to view from the smooth side) with an LED behind.

Your data

Photo (PNG/JPG/WebP)

Choose file Using a sample for preview

Parameters

Width (curved/lamp: arc length) (mm)100Height (mm)130Frame width (flat only) (mm)6Frame thickness (mm)5Thinnest (brightest) point (mm)0.8Thickest (darkest) point (mm)3Print layer height (rounds thickness, 0 = off) (mm)0.1Resolution (px, long side)200

Plate shape

FlatCurvedLamp cylinder

Arc angle (Curved only) (°)120

Adjust image

Brightness0Contrast0Gamma (>1 lifts midtones)1Blur (denoise) (px)0Auto contrastInvertFlip horizontally

Thickness mode

SmoothLayeredHalftone dots

Levels (Layered only)4Dot cell size (Halftone only) (px)4

Filament colours

Panel

Frame